Investigation : Chromium
Specimen type : Whole Blood
Spec container : EDTA 
Volume required : 4 ml
Reference range : see below
Turnaround : <5 days

Reference Range - MHRA threshold for Patients with MOM implants - 135nmol/L (7ppb)

Ideally blood should be collected using a plastic lined needle as specimen collection via a metal needle may cause significant contamination. If collecting the specimen using a metal needle, then the first 10 mL of blood should be discarded (or utilised for other tests required at the same time e.g. FBC, U and E etc.) only then should the tube for Chromium analysis be filled.

  1. If whole blood cobalt or nickel assay (or both) is also required a single sample may be utilized for all determinations.

  2. Blood anti-coagulated with EDTA is our preferred specimen.

    Heparinised blood may also be analysed (utilising the same collection protocol) but it should be noted that heparinised bottles are generally of a larger volume than EDTA bottles.

  3. The assay has been developed for use in investigation of excessive wear of M.O.M. joint prostheses.

  4. Whole blood is the preferred monitoring medium.

  5. Method limitations mean that this assay (as performed at this laboratory) is unsuitable for studies of nutritional status. Normal blood chromium levels (<40nmol/L).

Click here for MHRA MDA 2017.

Additional information on whole blood chromium and its clinical use can be found here: whole blood chromium.

ICE requesting info:ICE panel nameICE page nameColumnComment\Advice
Chem / Haem
Nutrit & Metab
Use Biochemistry (unlisted)


Laboratory Services Home Page