Investigation : Nickel
Specimen type : Whole Blood
Spec container : EDTA 
Volume required : 4 ml
Reference range : see below nmol/L
Reference Range - No MHRA threshold for Patients with MOM implants available

Ideally blood should be collected using a plastic lined needle, as specimen collection via a metal needle may cause significant contamination. If collecting the specimen using a metal needle, then the first 10 mL of blood should be discarded (or utilised for other tests required at the same time e.g. FBC, U and E etc.) only then should the tube for Nickel analysis be filled.

  1. If whole blood cobalt or chromium assay (or both) is also required a single sample may be utilized for all determinations.

  2. Blood anti-coagulated with EDTA is our preferred specimen.

    Heparinised blood may also be analysed (utilising the same collection protocol) but it should be noted that heparinised bottles are generally of a larger volume than EDTA bottles.

  3. The assay has been developed for use in investigation of excessive wear of M.O.M. joint prostheses.

  4. Whole blood is the preferred monitoring medium.

  5. Method limitations mean that this assay (as performed at this laboratory) is unsuitable for studies of nutritional status. Normal whole blood Nickel levels (<40nmol/L).

ICE requesting info:ICE panel nameICE page nameColumnComment\Advice
Chem / Haem
Nutrit & Metab


Laboratory Services Home Page